![Always use z hop when printing lots of support (it drags across the model and bent the support) : r/3Dprinting Always use z hop when printing lots of support (it drags across the model and bent the support) : r/3Dprinting](https://i.redd.it/2mqz5clr8yz21.jpg)
Always use z hop when printing lots of support (it drags across the model and bent the support) : r/3Dprinting
3.1-3.2.1] Z-hop causing consistently missed layers. Conflict with another setting? · Issue #3337 · Ultimaker/Cura · GitHub
Z-Hop only on printed parts doesn't seem to work properly - Ultimaker Cura - Ultimaker Community of 3D Printing Experts
![Be careful with Z hop. It was the biggest thing causing my prints to string. The only setting change between these two prints was taking out the Z hop. : r/3Dprinting Be careful with Z hop. It was the biggest thing causing my prints to string. The only setting change between these two prints was taking out the Z hop. : r/3Dprinting](https://external-preview.redd.it/Y3TkbNzox4xnidkBTCpoZuuUux3r8z-opkxN8Na8jVg.jpg?width=640&crop=smart&auto=webp&s=2cdb4b0082ba10e719b1cda5adce7d6594a655bd)